Here you will find some plans that I found myself on the internet.
The links of plans and building instructions are too on my heading "links".
I also posted the plan of Bruno enlarged 1,5 times.
Then all your cutters and have fun!

The Bruno is a start glider two axes feasible and inexpensive by the materials used: the Depron.
For construction details click here.
Parts of the plans:     Bruno 1m60 wings     Bruno 1m60 fuselage

The Bruno 2m10 is exactly the same model as the Bruno with some differences:
measurements as 1,5 times more to reach a size of 2m06.
The construction remains the same, just think it will enhance the interior to the forward fuselage with a bit of balsa,
at the risk of not landing very soft and ending up with a nose of glider scratched...
Therefore recommended strengthening.
For my part, I did my removable wings, otherwise it does not fit in my car...
The advantage of this model is that you end up with a glider 2m10 and only 950gr...
Because of this light, I could install a box containing my cell phone to make some videos embedded.
Permax 400 as a small engine and a battery 7 elements 600mha, and you can make small interesting videos.
Parts of the plans:     Bruno 2m10 wings     Bruno 2m10 fuselage

The encyclopaedia of small budding aerodynamicist:

Description: A complete site design to get started or simply learn more about aerodynamics - link

PredimRC :

Description: This software allows pre-size quickly and efficiently a model airplane or glider
(effective and completely free, a BIG THANK YOU to AGUERRI FRANCK) - link